User manual

5 Disposal

When operating the foot pump, the foot pump lever

must be pressed down and the locking device (4 )

turned into

the vertical position so that the foot pump lever is

unlocked for pumping. When

pressing down the foot pump lever and turning the

locking device (4) into the horizontal position,

the foot pump lever (6) is locked again and thus serves

as a carrying handle for the pump.

Caution! When unlocking, the foot pump

lever must be pressed down!

7. Malfunctions

If the pump does not attain full pressure due to air

in the system, hold the pump higher than the hollow

piston cylinder and operate the pump. Repeat the

procedure 2-3 times.

Eventually, the pump will have to be bled.

If hydraulic oil leaks from the pump, the respective

component or, where applicable, the entire tool must

be sent to the factory for repair.

1. Disposal

• For disposal, clean tool and disassemble it ac-

cording to the regulations for work safety and

environmental protection. Materials separation

must be carried out. Components can be recycled.

Hydraulic tools must not be disposed of in the

domestic waste, but at suitable collecting points.

• Lubrication and other auxiliary materials must

be treated as hazardous waste and may only be

disposed of by authorized specialists.

• The oil must be drained for disposal and disposed

of at suitable collecting points.

• All components that cannot be completely freed of

oil must be disposed of separately.

• The remaining parts of the tool must be disposed

of with due consideration for the applicable envi

ronmental standards.

Reducing environmental pollution and pre-

serving the environment are at the heart of

our activities.

HAZET – environmental protection is of fun-

damental importance to us.

Maintenance and cleaning

unlocked

locked