User manual

31
Do not put your hands inside the side housing
g
opening when removing wheel bearing!
Grease the threaded spindle 4930-1
a
before each use!
1.7 In the case of vehicles with ABS (antilock braking system), you must locate the housing
slit – e.g. housing 4930-720
g
with the ABS sensor.
1.8 Using suitable hand tools, pull out the wheel bearing by screwing in the threaded spindle
a
.
Important: Take care to retain the spindle nut
b
firmly in order to prevent it from
turning.
c Design and Function