User manual

23
Do not put your hands inside the side housing
g
opening when removing wheel bearing!
Grease the threaded spindle 4930-1
a
before each use!
a For Your Information
1. General Information
• Please make sure that the user of this device
carefully reads these operating instructions
and fully understands all information given
before it is used.
• These operating instructions contain impor
-
tant advice that is necessary for a safe and
trouble-free operation of your HAZET wheel
bearing tool.
• For effective use of the wheel bearing tool
as intended, it is essential that all safety and
other information in these operating instruc
-
tions is adhered to.
• For this reason, always keep these operat
-
ing instructions together with your HAZET
wheel bearing tool.
• This tool has been designed exclusively for
specific applications. HAZET emphasizes
that any modification to the device and/
or use on an application not detailed to its
intended application are strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damage to property originating
from improper application, misuse of the
tool or a disregard of the safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci
-
dents valid for the application area of this
tool must be observed and respected.
2. Explanation of Symbols
Attention: Pay strict attention to these
symbols!
READ THE OPERATING INSTRUCTIONS!
The owner of this tool set is obliged
to observe the operating instruc
-
tions and safety instructions and
should ensure that all users of this
tool set use it according to the infor
-
mation given.
NOTICE!
This symbol marks advice which is
helpful when using the device
CAUTION!
This symbol marks important specifi-
cations, dangerous conditions, safety
risks and safety advice.
ATTENTION!
This symbol marks advice which
if disregarded results in damage,
malfunction and/or functional failure
of the device.
3. Liability and Warranty
• Any deviation from the intended
use and/or any misapplication of
the device is not allowed and will be con
-
sidered as improper use.
• Any claims against the manufacturer and/
or its authorized agents because of damage
caused by improper use of the device are
void.
• Any personal injury or material losses
caused by improper use of the device are
the sole responsibility of the owner.
4. Spare Parts
• Only use the manufacturer’s original
spare parts.
• Unsuitable or defective spare parts may
cause damage, malfunction or total failure
of the device.
• The use of non-approved spare parts will
void all warranty, service and liability claims
as well as all claims for compensation
against the manufacturer or its agents, dis
-
tributors and sales representatives.
5. Disposal
• For disposal, clean device and disas-
semble it according to the regulations for
work safety and environmental protection.
Components can be recycled.
• Metal components can be scrapped.