3/40 HERITAGE TRACTOR CODE144S INSTRUCTION BOOK FROM SERIAL NO:144S001002 F–000786J MANUAL PART NO:144002 (REV.0.
1 5 (0011x3) 2 1 4 (711758) 2 6 3 5 (711747) 3 4 (711644) 1 2 3 1 4 2 1 (711719) 2 (711663) 3 5 3 3 6 7 6 (711636) 6 7 5 5 10 7 (711680) 6 4 2 9 8 1 11 1 2 F–000786J 2
7 11 10 3 8 1 7 2 4 5 12 9 6 10 10 9 1 2 5 6 7 7 1 5 2 8 6 2 3 1 8 3 11 12 1 2 3 1 4 5 2 F–000786J 3
13 3 14 1 2 2 3 15 12 4 5 2 11 1 9 3 10 F–000786J 8 4
16 17 18 1 1 2 2 3 19 20 2 3 1 1 F–000786J 4 5
21 1 2 22 1 23 3 2 1 3 4 4 25 24 2 3 2 1 1 F–000786J 6 2
26 2 1 27 28 4 (711632) 711653 1 3 (711909) 711653 2 3 29 30 5 6 1 6 5 7 (711741) F–000786J 7
32 31 3 4 34 33 1 2 1 35 1 2 F–000786J 8
36 J 8 4 2 1 A 2 1 5 6 4 E B 3 11 C F 9 3 10 D F–000786J H 9
37 1 3 2 9 10 16 17 4 5 11 6 12 7 13 8 14 15 18 38 1 2 3 10 11 12 4 5 6 13 14 7 8 9 15 39 711644 327350 711747 0011x3 711758 711719 711680 711636 711663 711909 F–000786J 711632 711653 10 711741
GB LIMITED WARRANTY Hayter Limited warrants to the original user / purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturers of the engine and battery pack system (where applicable) furnish their own warranty and services are provided through their authorised network (Refer to “Engine/Battery Pack Warranty Statement”).
GB CONTENTS LIMITED WARRANTY 11 INTERNATIONAL PICTORIALS 12 OWNER’S INFORMATION 13 SAFE OPERATION PRACTICES 13 ASSEMBLY 14 OPERATION 15 MAINTENANCE 16 TROUBLE SHOOTING CHART 19 Bystanders Away. Read User Instructions Before Operating This Machine. 18 8 WARNING: Do Not Use This Machine On Slopes Greater Than 10 Degrees. Control And Operating Pictorials (Figure 38) 9 DANGER: Keep People, Especially Children, Away From Unit. 1 Engine Start 2 Lights DANGER: No Step.
GB OWNER’S INFORMATION Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the location and the function of the controls. To help prevent an accident, follow the operating instructions and the safety rules. Keep this manual for future reference. 2. 3. WARNING: Look for this symbol to indicate important safety precautions.
GB ASSEMBLY All fasteners are in the parts bag. Do not discard any parts or material until the unit is assembled. WARNING: Before doing any assembly or maintenance to the mower, remove the wire from the spark plug. NOTE: In this instruction book, left and right describe the location of a part with the operator on the seat. NOTE: Illustrations and pictorials begin on page 2. NOTE: To assemble the following loose parts, use the fasteners shown at full size in Figure 39.
GB OPERATION NOTE: Illustrations and pictorials begin on page 2. Location Of Controls (Figure 8) Blade Rotation Control (1): Use the blade rotation control to start and stop the rotation of the blade. Clutch / Brake Pedal (2): The pedal has two functions. The first function is a clutch. The second function is a brake. Headlight Switch (3): The headlight switch is the first part of the ignition switch. To use the lights with the engine running, turn the key to the position for the lights.
GB brake pedal forward and set the parking brake. 3. To start again, make sure the shift lever is in the slowest speed. Move the throttle control to the SLOW position. Slowly release the pedal. 4. If you must stop or start on a hill, always have enough space for the unit to roll when you release the brake and engage the clutch. 5. Be very careful when you change directions on a hill. When on a slope or in a turn on a hill, move the throttle control to the SLOW position to help prevent an accident.
GB 10. Install the mower housing. See “How To Remove The Mower Housing”. How To Adjust The Blade Rotation Control WARNING: To prevent an injury, the blade rotation control must operate correctly. In normal usage, the blade rotation control will not require an adjustment. However, if the cutting performance decreases or the quality of cut is poor, make the following changes. 1. When you mow, make sure the throttle control is in the FAST position. 2.
GB 2. Check the air pressure in the tyres. If the air pressure is incorrect, the mower housing will not cut level. The correct air pressure is: Front Tyres 1,38 BAR (20 PSI), Rear Tyres 0,97 BAR (14 PSI). 3. If equipped, remove the gauge wheels. 4. (Figure 18) Move the lift lever (1) to the level adjustment position (2). WARNING: The lifter lever (1) is spring loaded. Make sure the lift lever (1) is locked in the level adjustment position (2). 5. (Figure 19) Loosen the left and right adjuster knobs (1).
GB TROUBLE SHOOTING CHART 2. Adjust the throttle control. 3. Clean the air filter. 4. Replace the fuel filter. 5. Move the throttle control to the FAST position. 6. Replace the spring for the blade idler. PROBLEM: The engine will not start. 1. Follow the steps, “How To Start The Engine” in this book. 2. Electric–Start Models: Clean the battery terminals. Tighten the cables. 3. Check for a loose wire. Tighten the limit switches. (See the wiring diagram.) 4. Drain the fuel tank. Clean the fuel line.
CODE144S REPAIR PARTS CHASSIS & HOOD ASSEMBLY 18 7 6 5 4 22 13 22 8 9 10 10–1 21 14–3 14 14–1 10–2 20 11 11 15 14–4 14–2 2 16 REF. CHASSIS REAR PG. (SEAT DECK ASSY.
CODE144S Key No. Description REPAIR PARTS CHASSIS & HOOD ASSEMBLY Key No. Part No. Description Part No. 1 Bracket, Grille RH MU690543–853 14 Grille Assy. MU92350 2 Bracket, Grille LH MU690544–853 15 Screw MU711629 3 Screw, 5/16–18x.75 MU711606 16 Rod, Hood Pivot MU690093 4 Dash MU94842 17 Hair Pin MU711676 5 Screw, 10–24x.500 MU711629 18 Bellows, Steering MU054789 6 Bearing, for Dash MU94214 19 Washer, Bel MU712063 7 Screw, 1/4–14x.
CODE144S REPAIR PARTS REAR CHASSIS ASSEMBLY 30 20–3 20 (20–1) 21 22 24 25 90 27 19 20–2 29 17 7 26 81 80 REF. ELECTRICAL PG. (TAPE SWITCH) 28 18 12 16 7 12 4–3 12 31 4–4 12 REF. FINAL ASSEMBLED DECK PG. (MOWER DECK) 7 91 5 4–2 13 31 14 15 4 (4–1) 13 15 6 13 7 7 23 8 9 REF. SUB ASSY. FRAME PG. (FRAME ASSY.
CODE144S Key No. REPAIR PARTS REAR CHASSIS ASSEMBLY Part No. Key No. Assy., Back Plate/Battery MU343678–853 20–1 Chute Weld Asm. Upper MU94350 4–1 Assy. Back Plate Flat MU95162 20–2 Shield, Transaxle MU95367 4–2 Battery Tray Assembly MU94563 20–3 Screw, 1/4–20x.63 MU711642 4–3 Screw, 5/16–18x.50 MU180073 21 Screw, 5/16–18x.75 MU711606 4–4 Nut, 5/16–18 Hexwdfllk Whiz MU45174 22 Bolt, Carriage 5/16–18x.
CODE144S REPAIR PARTS REAR CHASSIS ASSEMBLY 30 20–3 20 (20–1) 21 22 24 25 90 27 19 20–2 29 17 7 26 81 80 REF. ELECTRICAL PG. (TAPE SWITCH) 28 18 12 16 7 12 4–3 12 31 4–4 12 REF. FINAL ASSEMBLED DECK PG. (MOWER DECK) 7 91 5 4–2 13 31 14 15 4 (4–1) 13 15 6 13 7 7 23 8 9 REF. SUB ASSY. FRAME PG. (FRAME ASSY.
CODE144S Key No. 4 Description REPAIR PARTS REAR CHASSIS ASSEMBLY Part No. Key No. Description 20 T/A Shield & Upper Chute Assy MU690102–853 Part No. Assy., Back Plate/Battery MU343678–853 4–1 Assy. Back Plate Flat MU95162 20–1 Chute Weld Asm. Upper MU94350 4–2 Battery Tray Assembly MU94563 20–2 Shield, Transaxle MU95367 4–3 Screw, 5/16–18x.50 MU180073 20–3 Screw, 1/4–20x.63 MU711642 4–4 Nut, 5/16–18 Hexwdfllk Whiz MU45174 21 Screw, 5/16–18x.
CODE144S REPAIR PARTS GRASS BAGGER ASSEMBLY 73 71 89 104 87 101 87 69 72 86 89 87 97 102 61 62 56 57 54 88 87 67 59 REF.
CODE144S Key No. Description REPAIR PARTS GRASS BAGGER ASSEMBLY Key No. Part No. Description Part No. 54 Asm. Weld Upper Frame MU690044–853 69 Top Collector Assembly MU94908–848 55 Spring, Torsion RH MU690003 70 Handle, Dump Collector MU690019 56 Spring, Torsion LH MU690004 71 Handle, Reba Collector MU690506–853 57 Bracket, Spring Collector MU95339–853 72 Reba Collector Bag MU95389 58 Screw, 1/4–20x.
CODE144S REPAIR PARTS FRAME ASSEMBLY 35 34 7 40 38 4 39 6 3 5 9 8 100 41 2 100 94 17 96 12 13 10 97 1 29 37 37 14 18 33 15 36 32 16 23 36 20 95 30 26 19 24 27 28 31 343736B F–000786J 28
CODE144S Key No. Description REPAIR PARTS FRAME ASSEMBLY Part No. Key No. Description Part No. 1 Frame, Rail RH MU94564 26 Gear, Sector MU94121 2 Frame, Rail LH MU94565 27 Bearing, Sector Gear MU94123 3 Support, Seat RH MU94634 28 Screw, 5/16–18x1.00 MU001X84 4 Support, Seat LH MU94633 29 Nut, 5/16–18 MU15X113 5 Screw, .312–18x.75 MU26X249 30 Clutch/Brake Pedal MU94241 6 Brace, BackPlate RH MU94561 31 Screw, .312–18x.
CODE144S REPAIR PARTS FRAME ASSEMBLY 61 60 82 87 81 62 67 REF. SUB. ASSY. FRAME PG.
CODE144S Key No. Description REPAIR PARTS FRAME ASSEMBLY Part No. Key No. Description Part No. 60 Engine Plate MU94006 78 Hanger, Deck RH MU690199 61 Screw, .312–18x.75 MU26X249 79 Hanger, Deck LH MU690198 62 Nut, 5/16–18 MU015X88 80 Screw, 5/16–18x3.00 MU180113 67 Nut, 5/16–18 MU015X79 81 Nut, 5/16–18 MU015X88 68 Guide–Stack Pulley Belt MU94310 82 Screw, .312–18x.
CODE144S REPAIR PARTS STEERING REF. CUSTOMER SPEC PAGE 43 44 REF. CUSTOMER SPEC PAGE 26 28 27 REF. SUB. ASSY. FRAME PG.
CODE144S REPAIR PARTS STEERING Key No. F–000786J Description Part No. 9 Dust Hub Cap MU094618 26 Shaft, Steering MU94520 27 Bearing–Lower MU94124 28 Screw, 5/16–18x.75 MU711606 29 Gear, Pinion MU94122 30 Retaining Ring MU710102 31 Tire & Rim MU690049 31–1 Valve Stem MU338512 31–2 Rim MU338517 31–3 Bearing MU338513 31–4 Tire MU338516 34 Flatwasher MU711758 35 E–Ring MU0011X3 43 Screw, 1/4–20x.
CODE144S REPAIR PARTS MOTION DRIVE REF. SUB. ASSY. FRAME PG. (FRAME ASSY.) 18 61 61 62 58 17 44 64 62 12 65 20 19 63 21 2 50 53 14 16 22 28 45 15 14 29 42 25 23 54 5 37 30 43 47 4 11 51 13 REF. CUSTOMER SPEC PAGE 26 49 37 10 38 9 6 35 46 66 40 1 32 41 33 REF. KEY# 42 REF. KEY# 17 31 3 39 37 37 REF. ENGINE & CONTROL PG.
CODE144S Key No. * Description REPAIR PARTS MOTION DRIVE Key No. Part No. Description Part No. 1 Transaxle, MST206 * 36 Washer, Flat MU711758 2 Screw, 5/16–18X2.50 MU711669 37 Washer, Flat MU711904 3 Nut, 5/16–18 MU711634 38 Screw, 3/8–16x1.25 MU711905 4 Bracket, Stabilizer MU94620–853 39 Spacer MU95418 5 Screw, 5/16–18x.75 MU711606 40 Pulley, Idler MU690409 6 Screw, 5/16–18x.75 MU710268 41 Nut, 3/8–16 MU711920 9 Bracket, Shift MU94227 42 Belt, V 4L 114.
CODE144S REPAIR PARTS MOWER SUSPENSION ASSEMBLY 21 REF. SUB. ASSY. FRAME PG. (CONTROL ARM) 16 20 18 1 19 15 17 16 24 35 31 32 34 33 38 3 40 34 41 2 36 37 25 33 10 4 26 5 6 REF. SUB. ASSY. FRAME PG. (FRAME ASSY.) 30 29 28 27 REF. FINAL ASSEMBLED DECK PG. (LIFT ARM) 9 REF. FINAL ASSEMBLED DECK PG.
CODE144S Key No. Description REPAIR PARTS MOWER SUSPENSION ASSEMBLY Key No. Part No. Description Part No. 1 Assembly, Lift Arm MU95233–853 25 Grip MU94496 2 Screw, 1/2–13x1.50 MU711917 26 PTO Handle MU712035 3 Nut, 1/2–13 Lock MU711918 27 Paddle, Switch MU95284 4 Bracket. Lift Link MU94262–853 28 Screw, Thread Form MU711621 5 Washer, Flat MU711617 29 Bracket, PTO MU94018–853 6 Hair Pin MU711676 30 Screw, 5/16–18x.
CODE144S REPAIR PARTS ENGINE AND CONTROL ASSEMBLY 22 21 16 26 25 REF. KEY #1 34 REF. CHASSIS FRONT PG. (DASH & SUPPORT) 36 35 14 REF. DETAIL ’A’ 37 18 33 32 31 17 6 1 18 19 7 5 20 46 REF. SUB. ASSY. FRAME PG. (FRAME) 57 REF. SUB. ASSY. FRAME PG. (FRONT AXLE ASSY.
CODE144S Key No. Description REPAIR PARTS ENGINE AND CONTROL ASSEMBLY Key No. Part No. Description Part No. 1 13HP (See Engine Manual) Engine 20 Cap, Oil Drain Valve MU327422 –– Clip, Speed MU94951 21 Throttle Control MU94361 2 Engine Bolt 3/8x1.25 MU0025X7 22 Screw, #8–16x.38 MU711637 5 Muffler Gasket MU91309 25 Screw, 1/420x.50 MU711592 6 Lock Bracket MU92378 26 Washer (18x32) MU710249 7 Screw, 5/16–18x4.125 MU712065 31 Muffler MU91271 9 Screw, 5/16–18x.
CODE144S REPAIR PARTS DECK ASSEMBLY 61–4 40 39 61–3 17–2 42 77 15 41 15 61–1 61–1 17–4 40 24 37 17–3 39 REF. KEY #61 35 36–3 40 78 43 38 21 76 17–1 39 15 15 33 36(36–1) 36–2 24–2 34 30 23 29 REF. KEY #17 28 REF. KEY #24 17 31 32 61 64 24–4 24–3 29 58 65 60 80 53 15 88 24–1 54 57 55 29 50 56 15 1 67 56 1–1 52 73 51 72 1–2 50–1 50–4 50–3 71 50–2 74 75–1 REF. KEY #50 75 75–2 REF.
CODE144S Key No. Description REPAIR PARTS DECK ASSEMBLY Part No. Key No. Description Part No.
CODE144S REPAIR PARTS DECK ASSEMBLY 45 3 8 44 5 3 79 5 15 4 6 16 15 REF. DECK ASSEMBLY 47 49 46 48 2–3 66 2 2–1 2–4 REF.
CODE144S Key No. REPAIR PARTS DECK ASSEMBLY Part No. Key No. Assembly, Jackshaft Housing MU94305 12 Washer, Bellville MU17x166 2–1 Housing, Jackshaft MU94282 13 Flatwasher MU17x165 2–2 Bearing, Lower Jackshaft MU92282 14 Nut, 9/16–18 MU711910 2–3 Bearing, Upper Jackshaft MU92281 15 Screw, 3/8–16x1.00 MU711911 2–4 Spacer MU90904 16 Pulley Cover MU94288–853 3 Pulley, Deck MU690020 44 Belt, V 46.
CODE144S REPAIR PARTS ELECTRICAL ASSEMBLY REF. CUSTOMER SPEC PG 23 24 8 REF. CHASSIS REAR PG. (SEAT PAN) 6 25 15 18 DETAIL ’A’ 20 28 14 10 10–1 19 10–3 REF. CHASSIS FRONT PG. (DASH SUPPORT) 20 21 10–2 RED 28 RED YELLOW 21 16 RED 13 37 BLUE/BLACK BLACK RED 27 REF. CHASSIS FRONT PG. (ACCESS PANEL) GREEN/BLACK 17 REF. DETAIL ’A’ BLACK BLACK REF. SUB. ASSY. FRAME PG. (FRAME) 1 2 3 6 REF.
CODE144S Key No. Description REPAIR PARTS ELECTRICAL ASSEMBLY Part No. Key No. Description Part No. 1 Wire Harness MU95380 16 Ground Wire MU95420 2 Wire, Lead Solenoid to Start MU711579 17 Screw, 1/4x.50 MU711619 3 Rear Harness MU95381 18 Seat Switch MU94159 4 Wire Harness, Headlight MU340513 19 Battery 5 Plate MU92739 5 Socket, Lamp MU92372 20 Bolt, 1/4–20x.
CODE144S REPAIR PARTS CUSTOMER SPEC 2 1 4 3 6 7 5 8 7 9 344866A F–000786J 46
CODE144S REPAIR PARTS CUSTOMER SPEC Key No. F–000786J Description Part No.
D Übereinstimmungs–Bescheinigung GB Certificate of conformity P Declaração de conformidade S Konformitetsintyg N Konformitetserklæring F Certificat de conformité I Certificato di conformità DK Overensstemmelseserklæring E Certificado de conformidad SF Vaatimustenmukaisuusilmoitus NL Conformiteitsverklaring Der Unterzeichnete / I the undersigned / Le soussigné / Il firmatario / El abajo firmante / Ondergetekende / O abaixo assinado / Undertecknad / Undertegnede / Undertegnet / Allekirjoitta
mit den Vorschriften der Richtlinie 84/538 EWG übereinstimmt / conforms to the specifications of Directive 84/538 EEG / est conforme aux spécifications de la directive CEE 84/538 / è conforme alle specifiche della direttiva CEE 84/538 / se conforma a las especificaciones de la directiva CEE 84/538 / in overeenstemming is met de specificaties van de Richtlijn 84/538 EEG / obedece as especificações da diretiva 84/538 C.E.E.
D EG–Konformitätserklärung entsprechend der Richtlinie 98/37/EG entsprechend der EG–Richtlinien 89/336 GB EC Certificate of Conformity conforming to Directive 98/37/EC conforming to EEC Directives 89/336 F Déclaration de conformité pour la CEE I Certificato di conformita’ comunitario E Declaración de Conformidad conforme à la directive 98/37/CE conforme aux directives CEE 89/336 conforme alla Direttiva 98/37/CE conforme alle Direttive CEE 89/336 según la directiva 98/37/CE según las directivas de
219 FRANKLIN ROAD, BRENTWOOD, TN USA 37027 (vollständige Anschrift der Firma - bei in der Gemeinschaft niedergelassenen Bevollmächtigten ebenfalls Angabe der Firma und Anschrift des Herstellers) (full address of company - where this concerns authorized agents within the Common Market, also state the company name and manufacturer) (Adresse complète de la firme - en cas de mandataires établis dans la CEE, prière d'indiquer également la raison sociale et l'adresse du fabricant) (indirizzo completo della Societ
Zur sachgerechten Umsetzung der in den EG–Richtlinien genannten Sicherheits– und Gesundheitsanforderungen wurde(n) folgende Norm(en) und/oder technische Spezifikation(en) herangezogen: BS EN 386:1997, BS EN 1033:1996 und/oder BS EN 1032:1997 To effect correct application of the safety and health requirements stated in the EEC Directions, the following standards and/or technical specifications were consulted: BS EN 386:1997, BS EN 1033:1996 and/or BS EN 1032:1997 Pour mettre en pratique dans les règles de l’