User's Manual
NO： 修改内容 修改人 修改日期
114mm
114mm
When posion to BT or ANC posion, touch the logo area you can
control below funcons:
Music and Call Touch Controls (Le Logo)
THE HAYMAKER headphones
USER MANUAL
Control Switch
LED lndicator
3.5mm Jack Line-in Port
Music and Call Touch Controls
Light Feature Touch Controls
Type-C Charging Port
LED lndicator
Left Speaker Cup
Acon Funcon Status
Single Tap Answer call Incoming call
Long press （≧ 2 sec ）
Reject call Incoming call
Single Tap End call On the call
Swipe back to front twice Voice control BT/ANC on
Swipe front to back twice Redial latest caller BT/ANC on
Double Tap Play/Pause music BT/ANC on
Swipe back Track Back BT/ANC on
Swipe front Track Forward BT/ANC on
Swipe up Volume Up BT/ANC on
Swipe down Volume Down BT/ANC on
Long press
（≧ 8 sec ）
Clear
pairing
record No BT connecon
PC Controller CableRight Speaker Cup
Note ： Dirac 7.1, Dirac HD sound soware needs to be downloaded
System supported：Windows 10.
ANC
OFF
BT
RL
RL
Light Feature Touch Controls (Right Logo)
Note ：The LED light of headband logo is synchronized with the speaker cup logo, touch
the logo area to control.
(PC Gaming Mode)
from www.the-haymker.com
Left Speaker Cup Left Speaker Cup
Left Speaker Cup
Important safety instrucons
1. Read, follow and keep these instrucons.
2. For the best possible experience, always use the product as described by the manufacturer.
3. Always handle your headphones with care and protect them from external damage.
4. Clean your headphones using a so dry cloth. Never use water, cleaning detergent, leather polish or
other substances as they may damage your he
adphones permanently.
5. Avoid exposure to extreme condions such as very cold or hot temperatures, magnec fields or damp environments.
6. Listening to music at high volume for prolonged periods of me can cause permanent damage to your hearing.
7. Contains small parts and are not suitable for children age three (3) and below.
8. The headphones contain magnec material.
9. The headphones contain a Lith
ium baery. If misused or damaged it can become a hazard and is at risk of explosion.
10. Should a baery cell leak, do not allow the liquid to come in contact with skin or eyes.
11. The headphones must be disposed of with regular household waste. Please dispose of in accordance with local regulaons.
12. Do not use your headphones in the immediate proximity (10 cm) of a pacemaker.
13. Do not subject
the headphones and included accessories to abnormal wear and tear.
14. Do not expose the headphones to temperatures below
-
20°C or above +45°C.
15. Do not charge the headphones in temperatures below 0°C or above +45°C.
16. Do not aempt to burn the headphones. The baery could explode causing injury or death.
18. Do not aempt to open, modify, disassemble, repair or try to access the internal structure of the headphones.
They are not user serviceable.
17. Do not use or store the headphones near to a vehicle airbag due to risk of injury.
19. Do not use headphones while driving, jogging or walking through traffic areas. Headphones effecvely isolate external
sound and noise which means that when in use, you might not be able to hear your surroundings.
20. Do not drop, sit on or cause other unusual impact to the headph
ones.
21. Do not expose to fire, water or high voltage equipment.
22. Do not expose the headphones to rain or moisture.
23. Do not use the headphones near water, bathtubs, sinks, saunas, pools, other liquids or moist areas.
© 2019 Peak Audio, LLC. All rights reserved. Model: HM100.
Troubleshoong
Problem pairing and connecng
• Make sure the headphones are not connected to another device.
• Disable an
d enable Bluetooth on your device.
• Move the headphones closer to the device or alter their posions to avoid Bluetooth interference.
• Verify no other wireless equipment interfere with your headphones Bluetooth signal.
Problem with sound transmission
Move the streaming device to another posion. Your body, distance, different materials and other wireless
equipment can interfere with the wireless
signal between your device and headphones.
FAQ and quick start guide
Visit: www.the haymaker.com
for more instrucons and help on this product.
ANC
OFF
BT
When replacing the ear pads, the ear pad will be automacally forced into
the correct posion by magnets.
Ear Pad Replacement
Acon
Funcon
Long press
≧ 3 sec
LED light On /Off
Triple Tap Ambient Sound
On/Off
Swipe forward or back
Choose Color
Swipe up or down Change RGB Light
Mode
Remark
ANC ON Status, when
Ambient Sound On, the
content will be lower 10%
volume
Total 8 colors to choose
Single color breathing, Flash,
Stay on, Auto cycling for 8
colors
3s
x3
x1
x1
R
R
On the le frame edge, posion to BT buon to turn on Biuetooth , the operaon
LED flashes in blue, and the headphones enter pairing mode automacally as the
operaon LED flashes quickly in red and blue. To pair, go to Bluetooth® sengs on
your device and select “THE HAYMAKER”. The operaon LED will flash slowly in
blue upon a successful connecon.
R
R
R
If you do not pair successfully, please check the device, clear the device
name, repeat pairing process again.
Note: Aer the first pairing, the device name "The HAYMAKER" will be displayed
in the Bluetooth directory of the paired device.
R
Upon successful pairing to device, headphones will pair automacally within 5
seconds.
H
eadphones can be paired to 2 devices at the same
me.
Note: When Auxiliary cord is used, le control panel funcon is deacvated.
Must use paired device for
1. Wired Playback
2. Console Play
3. PC Mode
controls.
1. Wired Playback, plug auxiliary cord into headphone jack then into device.
Acon
LED indicator
Funcon
Single click Mic buon
Mic Mute LED on
Micr
ophone Mute
Sound Effect buon cycling Dirac 7.1 / HD LED
on
Stereo 2.0 (LED off), Virtual
7.1 / HD ON
Need soware
installed
Volume Up/Down N/A Control volume
+
x1
x1
x1
2. Console Play, plug auxiliary cord into headphone jack and then into
controller.
3.
P
C Mode, plug included PC controller into USB port of computer and then
auxiliary cord into headphone jack.
Acon
Posion switch to BT posion (OFF→ON)
Posion switch to Off Posion (ON→OFF)
BT Auto Pairing
Connecon Successful
Device out of range
BT Disconnected
on BT
Long Press Le Logo ≧ 8 sec while switch
Posion (BT standby mode, no
audio playback or on the call)
Low Baery Alert 3.3V
Low Baery Protecon Power Off 3.1V
Charging Alert
LED Indicator
Blue LED blinks 1.5 sec
Red LED on for 2 sec
Red/Blue LED Alternate
flashes
（0.5 sec on，0.25 sec off）
Blue LED flashes sl
owly（1 sec
on，3 sec off）
Red/Blue LED stays on
Red/Blue LED Synchronous slow
flashes（1 sec on，1 sec off ）
Red LED blinks 1 sec
Blue LED stays on
Red LED blinks 2 sec
Red LED stays on
Funcon
Power On (BT) (OFF→ON)
Power Off (ON→OFF)
BT Pairing Search
BT Pairing Successful
BT Disconnected
Clear pairing record back to
default seng. Enter pairing
status again.
Low Baery Alert 3.3V
Low Baery Protecon
Power Off 3.1V
Charging Alert
*Note: N
o line-in connecon in 3.5mm jack
Prompt sound and Red LED flashes
3 mes every 5 sec (0.75 sec on，
0.25 sec off , 0.75 sec on ）
BT Pairing Unsuccessful
Full Charge Alert Headphone Fully Charged
Baery duraon(In PC Gaming Mode, LED can sll be acvated,
which is powered
by internal lithium baery):
Plug Type-C charging cable to charge headphones. Please charge the headphones
with a 5.0V power adapter. 100% Full charge me ≦ 2.0hrs.
(The data in the table below is based
on the Cyan l
ight which
consumes the maximum current).
Mode Line in+PC
Gaming
Line in+ANC BT BT+ANC
Stay on
≧ 13 Hrs ≧ 11 Hrs ≧ 10 Hrs ≧ 8.6 Hrs
Single color cycling
≧ 14 Hrs ≧ 12 Hrs ≧ 11 Hrs ≧ 9.6 Hrs
Single color flash
≧ 14 Hrs ≧ 12 Hrs ≧ 11 Hrs ≧ 9.6 Hrs
Single color breathing
≧ 14 Hrs ≧ 12 Hrs ≧ 11 Hrs ≧ 9.6 Hrs
The headphones standby baery duraon: 6666 Hrs
aE ch color requires a different amount of current. Therefore, baery consumpon is
different per color.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by
Peak Audio,LLC
. is under license.
1. When auxiliary cord is used or under BT connecon, posion switch to ANC posion,
a prompt sound "beep" will be emied, then acve noise cancelling is acvated.
2. With ANC on, triple tap any area of right spearker cup, the ambient sound feature
will acvate / turn on and will lower content to 10% volume to easily listen to
surroundings. Repeat triple tap to deacvate / turn off ambient sound.
Mic
HD
7.1