Product Label

WARNING
!
INDUSTRIAL SAFETY
RISK MATRIX
Be alert and report ... Anything that you see, feel, smell or hear
differently than expected, or than you think is unsafe.
HAZARD RISK SOURCE RISK CONTROL
ELECTRICAL
Electrocution
Risk
Heating
iron
• Check that the electrical characteristics of the machine correspond to the power supply.
• Carry out grounding of the machine.
• Check that the ground connection is correct.
• Do not allow the cables to come into contact with chemical agents, water or mechanical stress.
THERMAL
Risk of Fire
Heating
iron
• Do not use the machine in atmospheres with explosion risk, due to the presence of gases, flammable vapors, etc
• Keep out of the field any material that could deteriorate or ignite with the heater or with the combustion of the
heating plate such as: oil, solvents, paints or varnishes, etc.
Burn
Risk
Heating
iron
• Never touch the surface of the iron directly when the iron is on.
• Move the heating plate cautiously.
• Carefully clean the heating plate.
• Do not touch the welding seam or surrounding areas before they have completely cooled down.
• Wear protective gloves.
❑ Do not adjust temperature above 300℃ or 575 °F
❑ Connect to the right power
SOCKET FUSION HEATING IRON
HY HAYES SERIES
¡WARNING!
Avoid Injury
This unit must be operated
by trained personnel only.