Compatibility Chart

P A G E | 4
www.hayesindustrialsolutions.com | DIGITAL HEATING TOOL
WARNING
SOURCE: Heating tool and heating faces
Do not adjust temperature above 300℃ or 575 °F. This can result in damage to the heater components and the non-
stick surfaces.
HAZARD
ELECTRICAL (Electrocution)
• Make sure to use a power source with the correct voltage and current capacity.
• Connect to a 110V grounded power source only.
• Keep the cables away from chemical agents or water.
THERMAL (Risk of fire / Burn Risk)
• Do not use the machine in atmospheres with explosion risk, due to the presence of gases, flammable vapors, etc
• Wear protective gloves. Never touch the surface of the heating tool or heating faces when they are hot.
• Move the heating plate cautiously when is hot and carefully remove the heating faces.
WARRANTY CERTIFICATE
LIMITED WARRANTY
Hayes Industrial Solutions Inc. warrants all products distributed. All products have 12 months warranty against
manufacturer's defects from the date of purchase from Hayes Industrial Solutions Inc. or Hayes Industrial Solutions Inc.
authorized dealers. Furthermore, this warranty only covers factory defects.
RETURN OF GOODS
Buyer must receive written authorization from Hayes Industrial Solutions Inc. or Hayes Industrial Solutions Inc.
authorized dealer before any returns. The goods must be in the same condition as received. The buyer has 15 days to
request a return of goods after the date of the purchase. Buyer is responsible for return freight for any reason other than
manufacturer's defects.
IMPROVEMENT
Hayes Industrial Solutions Inc. reserves the right to make any changes in or improvements on its products without
incurring any liability or obligation to update or change previously sold machines and/or the accessories.
PROPRIETARY RIGHTS
All proprietary rights pertaining to the design, colors, and branding, are exclusively the property of Hayes Industrial
Solutions Inc.
HAYES INDUSTRIAL SOLUTIONS INC
Heating Tool Model No:_____________________ Inspector: _______________________
Heater Serial No.: _________________________ Date Tested: _____________________
Factory Setting ℃ / °F: _____________________