Manualshelf

Use and Care Manual

ManualsBrandsHAYES Welding Solutions ManualsPlumbingHayes Digital Socket Fusion Pipe Welder Commercial Grade (up to 4 in.)
12345678
P A G E | 5
www.hayesfusion.com | HAYES FUSION
¡WARNING!
Avoid Injury
This unit must be operated by trained personnel only.
Industrial Safety
RISK MATRIX
Be alert and report anything that you see, feel, smell or hear differently than expected, or that
you think is unsafe.
SOURCE: Heating tool and heating adapters
Do not adjust temperature above 575 °F. This can result in damage to the heater components
and the non-stick surfaces.
RISK CONTROL
• Make sure to use a power source with the
correct voltage and current capacity.
• Connect to a 110V grounded power source
only.
• Keep the cables away from chemical agents
or water.
• Do not use the machine in atmospheres with
explosion risk, due to the presence of gases,
flammable vapors, etc
• Wear protective gloves. Never touch the
surface of the heating tool or heating
adapters when they are hot.
• Move the heating plate cautiously when it is
hot and carefully remove the heating
adapters.