Use and Care Manual

P A G E | 2
www.hayesfusion.com | HAYES FUSION
PROCEDURE / APPLICATION
Definition according to the ASTM F2620: The socket fusion technique consists of
simultaneously heating both the external surface of the pipe end and the internal surface of
the socket fitting to a designated temperature, then fuse them together by application of a
sufficient force. Thereby resulting in fusion.
Socket fusion tools consist of a heating tool, heating adapter, cold rings pliers and
chamfer/depth gages.
TECHNICAL INFORMATION
✓ Heating tool features
• Heat resistant aluminum plate
• Digital screen with adjustable temperature control
• Accurate heating temperature
• Automatic adjustable environment temperature
• Ergonomic handle
• Durable and efficient to maximize the pipe fusion
• Voltage protection
• Different working pipe sizes
You can purchase all socket accessories at www.hayesfusion.com
Heating Tool
CG2
CG4
Working range (Inches)
½” – 2” IPS
½” – 4” IPS
Power
800W
1400W
Voltage range
110V
110V
Frequency
50 / 60Hz
50 / 60Hz
Display Temperature
Fahrenheit / Celsius
Fahrenheit / Celsius
Temperature setting range
356°F - 536°F
356°F - 536°F
Factory Setting
500 ± 10°F
500 ± 10°F
Socket temperature range
500 ± 10°F
500 ± 10°F
Warning Temperature
>550°F
>550°F
Environment temperature
-68°F - 140°F
-68°F - 140°F
Relative humidity
45% - 95%
45% - 95%
Insurability Resistance
≥1MΩ
≥1MΩ
Leakage Current
≦5Ma
≦5Ma
Weight
4.2 LB (7” x 2” x 15”)
7.2 LB (7” x 2” x 15”)