Specification Sheet

ManualsBrandsHaws ManualsEmergency EquipmentHaws Shower and Eye Wash Testing Kit

APPROVED:

DRAWN:

PART NUMBER

SCALE:

SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

DATE:

ECN:

REVISED PER

CHK'D.:

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: HAWS@HAWSCO.COM

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

CLF

3/93

0002080204

9010 / 9011

SHOWER TEST KITS

1:1

01/30/17

INSTALLATION

5161

2017

FUNNEL

RING

HOLES

35-1/2"

902mm

78"

1981mm

ASSEMBLY INSTRUCTIONS:

1. CONNECT THREE-PIECE ROD ASSEMBLY AT THE

COUPLINGS (CEMENT IF DESIRED).

2. INSERT THE RING IN THE FUNNEL FOLD.

3. INSERT RING HOOKS INTO THE TWO HOLES

OF THE GRAB POLE (AS SHOWN).

1. PLACED THE SUPPLIED COLLECTION BUCKET

UNDER THE FUNNEL AND ACTIVATE THE SHOWER

FOR 6 SECONDS.

2. IF THE WATER LINE IS BELOW THE BLACK LINE

ON THE BUCKET THEN THE SHOWER FLOW RATE

IS NON-COMPLIANT.

3. MEASURE THE TEMPERATURE OF THE WATER

USING THE SUPPLIED THERMOMETER. ANSI

COMPLIANT RANGE IS 60°F - 100°F (15.5°C - 37.7°C)

MODEL 9011 ONLY:

THE MODEL 9010 / 9011 SHOWER TEST KITS

GUIDE THE WATER TO A FLOOR DRAIN OR

CONTAINMENT BUCKET.

Summary of content (1 pages)

PAGE 1
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. FUNNEL RING HOLES THE MODEL 9010 / 9011 SHOWER TEST KITS GUIDE THE WATER TO A FLOOR DRAIN OR CONTAINMENT BUCKET. ASSEMBLY INSTRUCTIONS: 1. CONNECT THREE-PIECE ROD ASSEMBLY AT THE COUPLINGS (CEMENT IF DESIRED). 2. INSERT THE RING IN THE FUNNEL FOLD. 35-1/2" 902mm 78" 1981mm 3. INSERT RING HOOKS INTO THE TWO HOLES OF THE GRAB POLE (AS SHOWN).