Specification Sheet

ManualsBrandsHaws ManualsEmergency EquipmentHaws 120 VAC emergency alarm and light system. Buzzer and flashing light are activated by a double pole, double throw flow switch.

model 9001

Emergency Alarm System

FEATURES & BENEFITS

AUDIBLE/VISUAL

Notification of an emergency is clearly noticeable with a

brightly flashing amber light, and easily recognizable with a

90 db buzzer. Buzzer can be silenced during testing by use

of the siliencing switch.

FLOW SWITCH

The alarm is activated by an 1-1/4" IPS double pole, double

throw brass flow switch that is supplied with an extra set of

electrical contacts for remote alarm hook-up.

FLEXIBILITY

The alarm is easily placed in a number of mounting

configurations with the supplied pipe clamp.

OPTIONS

For more information, visit www.hawsco.com or call (888)

640-4297.

SPECIFICATIONS

Model 9001 emergency alarm and light system will be

operated by a double pole, double throw flow switch, which

contains multiple sets of contacts for remote activation, and

activates an amber flashing light and buzzer at 90 db,

audible at 10 feet (304.8 cm) (buzzer can be silenced during

testing). Switch will activate at 2.4 gpm (9.1 L). System can be

mounted to pipe or wall. Voltage: 120 VAC, 50 or 60 cycles.

Supply: 1-1/4" NPT. Model 9001 is CSA electrical certified, TYPE

4. (Equivalent to Nema 4)

APPLICATIONS

Specifically, this alarm can be used with almost any Haws

combination shower/eyewash model. Model 9001 is CSA

electrical certified, TYPE 4. (Nema 4 equivalent)

1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 30 March, 2017

DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

Summary of content (3 pages)

PAGE 1
model 9001 Emergency Alarm System FEATURES & BENEFITS AUDIBLE/VISUAL Notification of an emergency is clearly noticeable with a brightly flashing amber light, and easily recognizable with a 90 db buzzer. Buzzer can be silenced during testing by use of the siliencing switch. FLOW SWITCH The alarm is activated by an 1-1/4" IPS double pole, double throw brass flow switch that is supplied with an extra set of electrical contacts for remote alarm hook-up.
PAGE 2
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. SHOWER (REF) 1. THE SIGNAL FROM THE PINK WIRE WILL BE SUPPLY VOLTAGE WHEN NO WATER IS FLOWING AND ZERO VOLTAGE WHEN THE FLOW SWITCH AND LOCAL ALARM ARE ACTIVATED. IF A REMOTE ALARM IS NOT USED, THE PINK WIRE MUST BE INSULATED AT ITS FREE END. LEAVING THE TWO CRIMP TERMINALS (SUPPLIED) CONNECTED WILL DO THIS.
PAGE 3
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1 SNAP CLAMP TO BE INSTALLED FIRST FOR VERTICAL SUPPORT. 2 SCREWS INSTALLED FROM FRONT, WITH BOX DOOR OFF. 3 NUTS TO BE INSTALLED TO A TORQUE OF 12 IN-LBS MAX.