Specification Sheet

model 8336
AXION
®
MSR Corrosion Resistant Shower and Eye/Face Wash
FEATURES & BENEFITS
CONSTRUCTION
2-1/2" green epoxy finished Schedule 80 PVC pipe
stanchion offer an added protection in highly corrosive
environments.
QUALITY CONTROL
Entire unit is pre-built and pressure tested to ensure a leak
free installation.
VALVES
Type 316 Stainless Steel eyewash and shower ball valves
are designed to make the flushing of fluid occur with the
simple pull of a lever or push of a stainless steel flag, and
come equipped with a stainless steel ball and stem to
provide greater protection against corrosion and
breakage.
SHOWER HEAD
AXION® MSR ABS plastic drench showerhead uses a
hydrodynamic design to give equal distribution of water
throughout the entire footprint of flow.
EYE/FACE WASH
AXION® MSR eye/face wash head (patent pending) uses
an inverted directional laminar flow to sweep
contaminants away from the vulnerable nasal cavity.
OPTIONS
Test Tag: SP170 is a green waterproof test card with space
for date and initials of inspector. Used to record weekly
testing of emergency equipment.
Large Shower/Eyewash Sign: Model SP178LG large vertical
universal combination emergency shower and eyewash
sign. Size: 18" x 24" (45.7 x 61 cm).
AXION® MSR Showerhead: Model SP829SS, AXION® MSR
stainless steel drench showerhead with integral 20 gpm
(75.7 L) flow control.
Thermostatic Mixing Valve: Model 9201E AXION®
Emergency Tempering Valve thermostatically mixes hot
and cold water to provide a safe fluid supply for
emergency showers and eyewash equipment, with a flow
rate of 31 gpm (117.3 L).
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 8336 corrosion-resistant PVC plastic combination
shower and eye/face wash shall include an AXION® MSR
eye/face wash head shall feature inverted directional
laminar flow which achieves Zero Vertical Velocity™
supplied by an integral 3.7 gpm flow control. Unit shall also
include the AXION MSR hydrodynamic designed ABS plastic
showerhead with 20 gpm flow control. The unit shall also
include an ABS plastic 11" (27.9 cm) round bowl, stainless steel
shower and eyewash ball valves equipped with stainless steel
ball and stem, green epoxy finish, schedule 80 PVC 2 1/2"
floor flange, schedule 80 PVC plastic vertical piping, universal
sign, 1-1/4" IPS supply, and 1-1/2" slip waste.
APPLICATIONS
Where the eyes, or body of any person may be exposed to
injurious or corrosive materials, suitable facilities for quick
drenching or flushing of the eyes and body shall be provided
within the work area for immediate emergency use.
Emergency eyewash facilities and deluge showers shall be in
unobstructed and accessible locations that require no more
than 10 seconds for the injured person to reach.Model 8336 is
certified by CSA to meet the ANSI Z358.1 Standard for
Emergency Eyewash and Shower Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 23 February, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.