Owner manual

FLOOR LINE
WASTE 1-1/4" IPS
6-3/4"
171mm
62-1/2"
1588mm
259mm 10-3/16"
SUPPLY
83-3/4"
2127mm
11"
279mm
42-3/8"
1077mm
756mm
29-3/4"
DUST COVER
(OPEN POSITION)
Ø3/8"
MOUNTING DETAIL
30°
B.C.
Ø8"
Ø203mm
Ø10mm
3X
Ø9"
Ø229mm
702mm
27-5/8"
L-STRAINER
SP220SS
OPTIONAL
1-1/4" IPS
3
NOTES: 1. DIMENSIONS MAY VARY BY ± 1/2 INCH [13mm]. 2. TO COMPLY WITH ANSI Z358.1-2009 FOR EMERGENCY EYEWASH OR EYE/FACE WASH AND SHOWER EQUIPMENT: - UNIT SHALL BE INSTALLED IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS AND ACCEPTABLE PLUMBING PRACTICES. - EYEWASH OR EYE/FACE WASH SHALL BE POSITIONED WITH NOZZLES NOT LESS THEN 83.8 CM (33 IN.) AND NO GREATER THAN 114.3 CM (45 IN.) FROM SURFACE ON WHICH USER STANDS AND 15.3 CM (6 IN.) MINIMUM FROM WALL OR NEAREST OBSTRUCTION. - SHOWER SHALL BE POSITIONED SO THAT SHOWER HEAD IS NOT LESS THAN 208.3 CM (82 IN.) NOR MORE THAN 243.8 CM (96 IN.) FROM SURFACE ON WHICH USER STANDS. - SHOWER SPRAY PATTERN SHALL HAVE A MINIMUM DIAMETER OF 50.8 CM (20 IN.) AT 152.4 CM (60 IN.) ABOVE SURFACE ON WHICH USER STANDS, AND CENTER OF SPRAY PATTERN SHALL BE LOCATED AT LEAST 40.6 CM (16 IN.) FROM ANY OBSTRUCTION. 3 IF NECESSARY USE LOCTITE 567 SEALANT ON THE MALE THREADS, JUST ABOVE THE FIRST THREAD.
DWG. NO.
APPROVED: DRAWN:
PART NUMBER:
DRAWING NO.:
SCALE: SHEET OF
REV.
DRAWING TYPE:
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
SIZE:
BY:ECN NO.
Page
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
SPARKS, NEVADA 89431
[phone] FAX [phone]
1455 KLEPPE LANE
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
MODEL(S)
09468A00
C HAYES
05/91
09468A00
23
0002080174.D
8330
SS SHOWER EYE/FACE WASH
1/16
1
1
A
HM
5 of 5
INSTALLATION
4888
2014