Specification Sheet

35-3/4"
908mm
3
36-5/16"
922mm
42"
1067mm
6-9/16"
167mm
806mm
31-3/4"
FLOOR
LINE
SHOWN IN
PUSH PLATE
CHECK/DRAIN
5 FT.
(BY OTHERS)
3/4" IPS
18-1/2"
470mm
16"
406mm
FROST LINE
CLOSED
86"
2184mm
3
POROUS FILL
POSITION
FEMALE
MALE SUPPLY
1-1/4" IPS
SUPPLY
FEMALE
1-1/4" IPS
WASTE
806mm
31-3/4"
Ø10mm
MOUNTING DETAIL
Ø203mm
Ø8"
B.C.
30°
Ø229mm
Ø9"
3X
Ø3/8"
VALVE
TOP VIEW
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
CH
05/91
16
0002080163.D
8300FP SHOWER
EYEWASH COMBO
1:1
11
FV
11/23/17
VWC
INSTALLATION
5241
2017
VWC
NOTES:
1. WHEN INSTALLING THIS UNIT, LOCAL , STATE, OR FEDERAL CODES SHOULD BE
ADHERED TO FOR INSTALLATION DIMENSIONS (LOCATIONS), WASTE AND SUPPLY
REQUIREMENTS OTHER THAN SHOWN.
2. TO COMPLY WITH ANSI Z358.1-2014 FOR EMERGENCY EYEWASH OR EYE/FACE WASH:
- EYEWASH OR EYE/FACE WASH SHALL BE POSITIONED SUCH THAT FLUSHING FLUID
PATTERN IS NOT LESS THAN 33" (838mm), NO GREATER THAN 53" (1346mm) FROM
SURFACE ON WHICH USER STANDS, AND 6.0" (153mm) MINIMUM FROM WALL OR
NEAREST OBSTRUCTION.
- SHOWER SHALL BE POSITIONED SUCH THAT SHOWER HEAD IS NOT LESS THAN 82"
(2083mm) OR GREATER THAN 96" (2438mm) fROM SURFACE ON WHICH USER STANDS.
- SHOWER SPRAY PATTERN SHALL HAVE A MINIMUM DIAMETER OF 20" (508mm) AT 60"
(1524mm) ON WHICH USER STANDS. CENTER OF SPRAY PATTERN SHALL BE LOCATED
AT LEAST 16" (406mm) FROM NEAREST OBSTRUCTION.
3 SPECIFY BURY DEPTH FOR FREEZE RESISTANT VALVE, STANDARD BURY DEPTHS ARE:
24" [610mm] AND 42" [1067mm].
4. DIMENSIONS MAY VARY BY ±1/2" (13 mm).
33"-53"
838mm-1346mm
FLOW PATTERN
257mm
10 1/8"