Specification Sheet

model 8164
AXION
®
MSR Emergency Drench Shower
FEATURES & BENEFITS
QUALITY CONTROL
Valve assembly is pre-built for reduced installation time
and an added peace of mind for the installer.
VALVES
Brass stay-open ball valve is designed so the full flow of
water remains on with the simple tug of a pull down lever.
Unit also comes equipped with a stainless steel ball and
stem to provide added protection against corrosion and
breakage.
SHOWER HEAD
AXION® MSR stainless steel showerhead uses a
hydrodynamic design to give equal distribution of water
throughout the entire footprint of flow.
SAFETY
8" x 10-3/4" (20.3 x 27.3 cm) universal emergency sign make
the unit easily detected in an emergency. Test card to
record weekly checks helps maintain the unit’s best
working quality.
PULL ROD
Pull down lever is mounted within a recessed stainless steel
wall cabinet for easy locating while providing a finished
look.
OPTIONS
Thermostatic Mixing Valve: Model 9201E AXION®
Emergency Tempering Valve thermostatically mixes hot
and cold water to provide a safe fluid supply for
emergency showers and eyewash equipment, with a flow
rate of 31 gpm (117.3 L).
Thermostatic Mixing Valve: Model 9201H Lead-free
AXION® Emergency Tempering Valve thermostatically
mixes hot and cold water to provide a safe fluid supply for
emergency showers and eyewash equipment, with a flow
rate of 31 gpm (117.3 L).
Scald Protection Bleed Valve: Model SP157B, fully
engineered scald protection valve.
Emergency Alarm System: Model 9001, 1-1/4" 120 VAC
emergency alarm and light system. Buzzer and flashing
light are activated by an 1-1/4" double pole, double throw
flow switch.
For more information, visit www.hawsco.com or call (888)
640-4297.
SPECIFICATIONS
Model 8164 flush ceiling mounted drench shower shall include
the AXION® MSR hydrodynamic design polished stainless
steel showerhead with 20 gpm flow control mounted in or
hanging down from the ceiling, brass stay-open ball valve
equipped with stainless steel ball and stem, recessed stainless
steel wall cabinet with pull down lever, universal sign, and 1"
NPT supply.
APPLICATIONS
Where the body of any person may be exposed to injurious or
corrosive materials, suitable facilities for quick drenching or
cleansing of the body shall be provided within the work area
for immediate emergency use. Emergency eyewash facilities
and deluge showers shall be in unobstructed and accessible
locations that require no more than 10 seconds for the injured
person to reach.Model 8164 is certified by CSA to meet the
ANSI Z358.1 Standard for Emergency Eyewash and Shower
Equipment.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 23 February, 2017
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.