Specification Sheet

APPROVED:
DRAWN:
PART NUMBER
SCALE:
SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved.
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
C
R
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
MJ 02/13/17
3
0510000491.D
MODEL 1920FR
N/A
23
FV
02/27/17
5081
FV
INSTALLATION
5172
2017
MJ
NOTES:
1
THIS BOTTLE FILLER REQUIRES THE USE OF MODEL 6521FR FREEZE RESISTANT VALVE
ASSEMBLY (SOLD SEPERATELY)
2
VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE
TO ALLOW ACCESS TO THE ACCESS PANEL.
3. SEE SEPERATE INSTALLATION DRAWINGS FOR FOUNTAINS, MOUNTING PLATES, BACKPANELS,
4. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO.
FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED
ACCORDINGLY.
6521FR FREEZE
RESISTANT VALVE
ASSEMBLY (FOR
FOUNTAIN, SHOWN
FOR REF. ONLY)
6521 VALVE ASSEMBLY
ACCESS PANEL
2
6521FR FREEZE RESISTANT
VALVE ASSEMBLY (FOR BF)
1 2
CONNECT AIR LINE TO BOTTLE
FILLER PUSH BUTTTON, TRIM TO FIT.
7/8" OD INSULATING TUBING (MUST COVER
ENTIRE SUPPLY TUBING, FROM THE
NOZZLE TO MODEL 6521FR ASSEMBLY,
TRIM TO FIT.
3/8" OD POLYPROPYLENE TUBING
(CONNECT TO NOZZLE WITH SUPPLIED
PUSH IN ELBOW, TRIM TO FIT.
1-1/4" NPT
WASTE (NOT
SUPPLIED)
1/2" NPT SUPPLY
(NOT SUPPLIED)
BP15
6469
6700 MOUNTING PLATE
(BEHIND FINISH WALL)
- OR -
6700R RETROFIT PLATE
(ON TOP OF FINISH WALL)
INSTALLATION ABOVE HAWS 1109FR, 1109FRBP
BP3
AND DRIP TRAY. HOLD ROUGH-IN DIMENSIONS
±
1/8" (3.2mm)