Specification Sheet

ManualsBrandsHaws ManualsDrinking FountainsHaws 1 GPM Wall Mounted Freeze Resistant Bottle Filler

model 1920FR

Freeze-Resistant Bottle Filler

FEATURES & BENEFITS

CONSTRUCTION

Unit is made of 14 gauge Type 304 stainless steel with a

satin finish that resists stains and corrosion, and has soft

rounded corners. Unit features vandal-resistant bottom

plate and dispensing nozzle.

EFFICIENT & FLEXIBLE INSTALLATION

Unit is designed for retrofit or new construction

applications. No drain required for mounting over existing

drinking fountain.

DURABLE BUILD

Good for outdoor applications where the unit may

encounter freezing conditions. Made with 100% Stainless

Steel for vandal resistance.

MOUNTING OPTIONS

Select from mounting plate and back panel models to

complete installation. Unit can mount on various wall types.

OPTIONS

Mounting Plate: Model 6700 universal mounting plate for

most wall mounted fountains. Priced Separately.

Back Panel: Model BP15, satin finish stainless steel 15 inch

back panel for Model 1920.

For more information, visit www.hawsco.com or call (888)

640-4297.

SPECIFICATIONS

Model 1920FR wall mounted freeze-resistant bottle filler can

be a stand-alone wall mounted station, or mounted over the

1109FR & 1119FR series fountains. It shall include stainless steel

construction, a polished chrome-plated brass push-button

operated by a pneumatic valve installed on the inside wall

where room temperatures do not drop below 50° F (10° C),

and self-draining water lines which protect the unit from

freezing. REQUIRES MODEL 6521FR PRICED SEPARATELY.

APPLICATIONS

This type of wall mounted bottle filler may be placed in

settings such as schools, parks and other outdoor locations

where the freezing temperatures may exist. Haws®

manufactures drinking fountains and electric water coolers to

be lead-free by all known definitions including NSF/ANSI 61,

Section 9, NSF/ANSI 372, California Proposition 65, and the

Federal Safe Drinking Water Act. Product is compliant to

California Health and Safety Code 116875 (AB 1953-2006).

1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. info@hawsco.com :: www.hawsco.com :: 09 November, 2017

DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

Summary of content (4 pages)

PAGE 1
model 1920FR Freeze-Resistant Bottle Filler FEATURES & BENEFITS CONSTRUCTION Unit is made of 14 gauge Type 304 stainless steel with a satin finish that resists stains and corrosion, and has soft rounded corners. Unit features vandal-resistant bottom plate and dispensing nozzle. EFFICIENT & FLEXIBLE INSTALLATION Unit is designed for retrofit or new construction applications. No drain required for mounting over existing drinking fountain.
PAGE 2
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 1920 MOUNTING HOLE LOCATIONS NOTES: 1 THIS BOTTLE FILLER REQUIRES THE USE OF MODEL 6521FR FREEZE RESISTANT VALVE ASSEMBLY (SOLD SEPERATELY) 2 VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE TO ALLOW ACCESS TO THE ACCESS PANEL. 3. WHEN INSTALLING THIS UNIT, LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO.
PAGE 3
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 3/8" OD POLYPROPYLENE TUBING (CONNECT TO NOZZLE WITH SUPPLIED PUSH IN ELBOW, TRIM TO FIT. 6700 MOUNTING PLATE (BEHIND FINISH WALL) - OR 6700R RETROFIT PLATE (ON TOP OF FINISH WALL) 7/8" OD INSULATING TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM THE NOZZLE TO MODEL 6521FR ASSEMBLY, TRIM TO FIT.
PAGE 4
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 7/8" OD INSULATING TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM THE NOZZLE TO MODEL 6521FR ASSEMBLY, TRIM TO FIT. 6700.4L MOUNTING PLATE 3/8" OD POLYPROPYLENE TUBING (CONNECT TO NOZZLE (BEHIND FINISH WALL) WITH SUPPLIED PUSH IN ELBOW, - OR TRIM TO FIT.