r) Cw INSTALLATION, OPERATION G Ean pare & MAINTENANCE INSTRUCTIONS 1455 Pepper Lane *Sparks, NV 89431-8487 «(775) 359-4712 +Fax (775) 358-7424 Ea nail: + website: www hawser No, 2076786(18} Mode! 1311 Drinking Fountain NOTE TO INSTALLER: Please leave this information with the Maintenance Department. pe LIMITED WARRANTY HAWS warrants that this specific product Is guaranteed against defective malarial or poor workmanship for a pried of one year from date of shipment.
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable Wrecker 0 piper Wrench) S64” hex key 127 THE" socket wrench or open and ranch. | LOCATION OF UNIT: The Model 1311 Dripping Fountain is a wheelchair accessible drinking water facility. The height dimensions shown, nest current ADA requirements. When installing this uni, focal, slate or federal doves should be adhered fo. If height other than shown is required, then dimensions must be adjusted accordingly.
INSTALLATION PROCEDURE Refer to Installation Drawing for mounting besought. For steps below, refer to exploded view. STEP 12 Remove hex lock nut and washers from bubble heads, set aside. install bubble heads through receptor, Install respectively rubber washer, fiber washer, and then nut onto unshakable. Sourly tighten nat. STEP Z: Remove push button assembly from 587488 valve with spanner wench provided. Be sure 10 also remove [chrome plated) ring nut and {chrome plated) washer from valve.
SE FUE HE CORRECT 47 TIF FUGUE BH, HEIR] BROUGHT [PROVE METH BRE SERIF EIN ASO SATES BUSY TR CHARGE TAT OTIOSE, NOTES: Ho REMOVED, FOR INSTALLATION INSTRUCTIONS. PARTS BREAKDOWN CONNECT CLEAR "POLYETHYLENE” TUBING ON FREE FLOW SIDE (VALVE ROBUSTER HEAD] ONLY. [3] REFER TO 587458 FEDERATION AND MAINTENANCE MANUAL Mass APPLY 1 DOT OF LOCATE 222M8 THREAD LOCKER ON FEMALE THREADS OF PUSH BUTTON.
