Specification Sheet

model 1119FR
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
BUBBLER HEAD
Polished chrome-plated brass bubbler head features an
integral basin shank for added strength, and is equipped
with a shielded, anti-squirt orifice that provides a steady
sanitary source of water.
BACK PANEL
Stainless steel back panel helps to protect the wall from
inadvertent splashing, and its decorative satin finish
increases location visibility and completes the fountains
attractive appearance.
BARRIER-FREE
Barrier-free capabilities combined with its ease of use
allows for a number of installation location possibilities.
CONSTRUCTION
18 gauge Type 304 Stainless Steel construction with
vandal-resistant bottom plates provides a long lasting unit
with added peace of mind.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
ALL-WEATHER CAPABILITIES
Fully engineered system with the pneumatic operated
freeze-resistant valve installed on the inside wall where
room temperature does not drop below 50 When valve
goes to off position, water left in supply line between valve
and bubbler drains back into waste inside cabinet, which
allows fountain on outside to function year-round.
OPTIONS
Mounting: Model 6700.4 "Hi-Lo" universal mounting plate for
most dual bubbler fountains.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
Cane Touch Skirt: Model SK1, satin finish stainless steel cane
touch skirt for installation on high unit to comply with ADA
protruding objects guidelines.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1119FR "Hi-Lo" wall mounted barrier-free
freeze-resistant drinking fountain shall include dual 18 gauge
Type 304 Stainless Steel satin finish basins, polished
chrome-plated brass vandal-resistant bubbler heads,
polished chrome-plated brass push-buttons which operate
pneumatic valves installed on the inside wall where room
temperatures do not drop below 50°F, self-draining water
lines protect the unit from freezing, polished chrome-plated
brass vandal-resistant waste strainers, stainless steel satin finish
back panel, high and low fountain mounting levels, and
1-1/4" O.D. waste pipes.
APPLICATIONS
Perfect for either public or private outdoor settings, Model
1119FR is a great fit in areas where aesthetics are important to
the overall appeal of the architecture. This series is precisely
mounted, making it a nice addition to any surrounding.
Beautiful satin finish helps to maintain the fountains overall
appeal so it always remains looking as new as it did when it
was installed. Specifically, this type of wall mounted drinking
fountain may be placed in settings such as: parks, schools,
and other facilities where the temperature may drop into
freezing conditions.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.