Specification Sheet

model 1119
Wall Mounted Drinking Fountain
FEATURES & BENEFITS
BUBBLER HEAD
Polished chrome-plated brass bubbler head features an
integral basin shank for added strength, and is equipped
with a shielded, anti-squirt orifice that provides a steady
sanitary source of water.
BACK PANEL
Stainless steel back panel helps to protect the wall from
inadvertent splashing, and its decorative satin finish
increases location visibility and completes the fountains
attractive appearance.
BARRIER-FREE
Barrier-free capabilities combined with its ease of use
allows for a number of installation location possibilities.
INTEGRATED TRAP
Spacious fountain design allows for the trap to be internally
mounted which allows for easy access, and aids and
reduces the installation process.
CONSTRUCTION
18 gauge Type 304 Stainless Steel construction with
vandal-resistant bottom plates provides a long lasting unit
with added peace of mind.
QUALITY CONTROL
Both fountains are pre-built and fully water and pressure
tested to ensure no leaks and proper function for reduced
installation time and added peace of mind.
FINISH
Beautiful #4 satin stainless steel finish basin can be easily
cleaned and maintained while also resisting corrosion.
PUSH BUTTON
With its patented (Pat.# 6,981,692) stainless steel,
push-button activated, valve assembly which allows for
front access stream adjustment as well as cartridge and
strainer access, this fountain offers 100% lead free
waterways.
OPTIONS
Bubbler Head: Model 5725 EnviroGard bubbler is a
polished chrome-plated solid brass bubbler head with
stainless steel water activated pop up canopy. (Pat.#
7,025,282)
Filter: Model 6426, 12" x 2", in-line lead removal element
that reduces lead from incoming water supply.
Mounting: Model 6700.4 "Hi-Lo" universal mounting plate for
most dual bubbler fountains.
Support Carrier: Model 6800 universal in-wall mounting
support for use with most fountains.
To see all options for this model, visit www.hawsco.com
SPECIFICATIONS
Model 1119 "Hi-Lo" wall mounted barrier free drinking fountain
shall include dual 18 gauge Type 304 Stainless Steel satin finish
basins, push-button operated stainless steel valves with
front-accessible cartridge and flow adjustment, 100%
lead-free waterways, polished chrome-plated brass
vandal-resistant bubbler heads, polished chrome-plated
brass vandal-resistant waste strainers, vandal-resistant bottom
plates, stainless steel satin finish back panel, high and low
fountain mounting levels, and 1-1/4" IPS traps.
APPLICATIONS
Perfect for either public or private indoor/outdoor settings,
Model 1119 is a great fit in areas where aesthetics are
important to the overall appeal of the architecture. This series
is precisely mounted, making it a nice addition to any
surrounding. Beautiful satin finish helps to maintain the
fountains overall appeal so it always remains looking as new
as it did when it was installed. Specifically, this type of wall
mounted drinking fountain may be placed in settings such as:
schools and other locations in and around office buildings
where the temperature remains above freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and
electric drinking fountains to be lead-free by all known
definitions including ANSI/NSF Standard 61, Section 9,
California Proposition 65, and the Federal Safe Drinking Water
Act. Product is compliant to California Health and Safety
Code 116875 (AB 1953-2006) as evaluated by CSA
International.
1455 Kleppe Lane :: Sparks, NV 89431 :: p. 775.359.4712 :: f. 775.359.7424 :: e. [e-mail] :: www.hawsco.com :: 24 February, 2010
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.