Features Guide

1011HPS
Wall Mounted Drinking Fountain
Quality Control
Both fountains are pre-built and fully water and pressure tested
to ensure no leaks and proper function for reduced installation
time and added peace of mind.
Push Button
With its patented (Pat.# 6,981,692) push-button valve assembly
which allows for front access stream adjustment as well as
cartridge and strainer access, this fountain offers the ultimate in
ease of maintenance.
Construction
18 gauge Type 304 Stainless Steel fountain with attractive and
functional swirl bowl design, along with a vandal-resistant
bottom plate provides a long lasting unit with added peace of
mind.
Bubbler Head
Polished chrome-plated brass bubbler head with integral laminar
flow prevents splashing and provides a superior flow pattern.
The integral basin shank and inserted roll pin adds vandal
resistance strength to the design, and the shielded angled
stream orifice produces a steady sanitary source of water.
Mounting
3/16" steel mounting plate with supplied mounting hardware
provides a solid unit base and allows for easy installation to a
framed wall. (P-trap and stop require rear access)
FEATURES & BENEFITS
o
Bubbler Head: Model 5725 EnviroGard™ bubbler is a polished
chrome-plated solid brass bubbler head with stainless steel
water activated pop up canopy. (Pat.# 7,025,282)
o
Filter: Model 6426, 12" x 2", in-line lead removal element that
reduces lead from incoming water supply.
o
Access Panel: Model 6608HPS, high polished stainless steel
32" x 9" access panel for Model 1011HPSMS.
o
Cane Touch Skirt: Model SK3HPS, high polished stainless steel
cane touch skirt for installation on high unit to comply with ADA
protruding objects guidelines.
To see all options for this model, visit www.hawsco.com.
OPTIONS
Model 1011HPS "Hi-Lo" wall mounted barrier-free drinking fountain
shall include dual 18 gaugeType 304 high-polished stainless steel
finish basins with integral swirl design, push-button operated valves
with front-accessible cartridge and flow adjustment, polished
chrome-plated brass vandal-resistant bubbler heads with integral
laminar anti-squirt flow, chrome-plated brass vandal-resistant
waste strainers, vandal-resistant bottom plates, high-polished
stainless steel finish back panel, high and low fountain mounting
levels, and 1-1/4" O.D. waste pipes. (P-trap and stop require rear
access)
SPECIFICATIONS
Perfect for either public or private indoor/outdoor settings, Model
1011HPS is a great fit in areas where aesthetics are important to
the overall appeal of the architecture. This series is precisely
mounted, making it a nice addition to any surrounding. Beautiful
high-polished finish helps to maintain the fountains overall appeal
so it always remains looking as new as it did when it was installed.
Specifically, this type of wall mounted drinking fountain may be
placed in settings such as: schools and other locations in and
around office buildings where the temperature remains above
freezing.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and electric
drinking fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65, and
the Federal Safe Drinking Water Act.
APPLICATIONS
1455 Kleppe Lane | Sparks, NV 89431 | [p] 775.359.4712 | [f] 775.359.7424 | [e] [e-mail] | www.hawsco.com | 9 April, 2009
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.