Manualshelf

Owners manual

ManualsBrandsHawking Technology ManualsComputers & LaptopsWireless-1750AC Managed AP Pro Wireless-AC Concurrent Wall-Mount Access Point (HW17ACM)
21222324252627282930
16
Chapter 3 - Hardware Installation
3-1. Connecting the access point to a router or PoE switch
1. Connect a router or PoE switch to the access point’s LAN 1 port using an Ethernet cable. PoE
switches must be connected to the access point’s LAN 1 port.
2. If you are using a router, then connect the power adapter to the access point’s 12V DC port and pug
the power adapter into a power supply.
3. If you are using a router, then connect the power
adapter to the access point’s 12V DC port and plug the
power adapter into a power supply.
Do not use the power adapter if you are using
a PoE switch.