Owners manual

RADIUS Type

Select “Internal” to use the access point’s built-in RADIUS

server or “external” to use an external RADIUS server.

RADIUS Server

Enter the RADIUS server host IP address.

Authentication Port

Set the UDP port used in the authentication protocol of the

RADIUS server. Value must be between 1 – 65535.

Shared Secret

Enter a shared secret/password between 1 – 99 characters in

length. This should match the “MAC-RADIUS” password used

in 4-3-1-3-6 or 4-3-2-3.

Session Timeout

Set a duration of session timeout in seconds between 0 –

86400.

Accounting

Enable or disable RADIUS accounting.

Accounting Port

When accounting is enabled (above), set the UDP port used in

the accounting protocol of the RADIUS server. Value must be

between 1 – 65535.