Owners manual

54
WPS
Check/uncheck this box to enable/disable WPS functionality.
WPS must be disabled when using MAC-RADIUS authentication
(see 4-3-1-3-6 & 4-3-4).
Product PIN
Displays the WPS PIN code of the device, used for PIN code
WPS. You will be required to enter this PIN code into another
WPS device for PIN code WPS. Click “Generate PIN” to
generate a new WPS PIN code.
Push-Button WPS
Click “Start” to activate WPS on the access point for
approximately 2 minutes. This has the same effect as
physically pushing the access point’s WPS button.
WPS by PIN
Enter the PIN code of another WPS device and click “Start” to
attempt to establish a WPS connection for approximately 2
minutes.
WPS Status
WPS security status is displayed here. Click “Release” to clear
the existing status.