Owners manual

5-6 Repeater AP MAC Filter

For each Repeater AP, users can allow or reject clients based on their MAC address. Click on Wireless,

Repeater AP MAC Filter Setup. (This feature is only available in Client Bridge + Repeater AP and WISP

Modes)

Action: Select the desired access control type from the drop-down list; the options are Disable,

Allow or Reject.

Only Allow List MAC: Define certain wireless clients in the list which will have

granted access to the Access Point while the access will be denied for all the

remaining clients – Action Type is set to “Only Allow List MAC”.

Only Deny List MAC: Define certain wireless clients in the list which will have

denied access to the Access Point while the access will be granted for all the

remaining clients - Action Type is set to “Only Deny List MAC”. MAC Access

Control is the weakest security approach. WPA or WPA2 security methods should

be used when possible.

Mac Address: Type in the Mac address of the client you wish to add under the Mac filter.

5-7 WDS Setup

The administrator could create WDS Links to expand wireless network. When WDS is enabled, access

point functions as a wireless bridge and is able to communicate with other access points via WDS links. A