Manualshelf

Owners manual

ManualsBrandsHawking Technology ManualsComputers & LaptopsHigh Power Outdoor Wi-Fi Access Point, Bridge with built-in AP Controller and PoE included (HPOW5CM)
61626364656667686970
67
To enable roaming between multiple AP devices, the first AP must key in the MAC address of the second
AP and vice versa. The NAS Identifier and 128-bit key should be identical on both Aps. This will enable
device roaming between both APs.
Mac Address: Administrators must enter the MAC address of the other AP
NAS Identifier: Enter 1-48 octets of network domain name
128-bit Key: Enter shared key
R0 Key Holder List
After setting up R0 Key Holder, the information will appear on this list.
R1 Key Holder List:
Enter a unified set of R1 Key Holder Identification certification.