Owners manual

15
When AP Controller mode is setup, one HPOW5CM is setup to control multiple HPOW5CM’s on the
network. The HPOW5CM in AP controller mode can set IPs, configure wireless settings, monitor
wireless status, upgrade firmware and remotely controll multiple HPOW5CMs. The other HPOW5CMs
must be in AP mode. Go to section 3-1
When AP mode is chosen, the system can be configured as a standard wireless access point. In this
mode, the device can be used as an Access Point for wireless client connection. All Ethernet ports wand
wireless interfaces are bridged together. Go to section 3-2