Owners manual
112
VLAN setup:
VLAN: The function can select VLAN (see section 4-3-1)
VLAN Mode: Administrator can enable or disable VLAN mode of the managed APs.
Access Point0: Administrator can enable or disable 2.4GHz of the managed APs.
802.1d Spanning Tree: Administrator can enable or disable the function. (See section 4-3-1)
Control Port: The function administrator can enable or disable of the managed APs
(please refer to section 4.3.1)
IAPP The function: Administrator can enable or disable of the managed APs. (See section 4-
3-3)










