User Manual

Maximum Clients: The default value is 32. You can enter the number of wireless clients that can associate
to a particular SSID. When the number of client is set to 5, only 5 clients at most are
allowed to connect to this VAP.
5-3-2 Repeater Security Settings
Security Type: Select the desired security type from the drop-down list; the options are WEP, WPA-PSK,
WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
Disable: Data are unencrypted during transmission when this option is selected.
WEP: WEP, Wired Equivalent Privacy, is a data encryption mechanism based on a 64-bit,
128-bit or 152-bit shared key. Select WEP as the security type from the drop down list as
desired.
Key Length: The key size of WEP encryption can be 64bit, 128bit or 152bit.
WEP auth method: You can select the appropriate value: Open system (If
enabling this mode, there is no need authentication to access AP or Wireless
NIC) or Shared (Only those who are sharing the same key with the AP can
connect with it).
Key Index: You can select the Key which you want to use. Other wireless station
must have the same key value to connect with the device, 4 different WEP keys
can be configured at the same time, but only one is used. Effective key is set
with a choice of WEP Key 1, 2, 3 or 4.