Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
71727374757677787980
4-9 SNMP Setup
SNMP is an application-layer protocol that provides a message format for communication between SNMP
managers and agents. By enabling SNMP function, the administrator can obtain the system information remotely.
You can access the settings by going to System, SNMP
SNMP v2c Enable
Check to enable SNMP v2c.
ro community: Set a community string to authorize read-only access.
rw community: Set a community string to authorize read/write access.
SNMP v3 Enable
Check to enable SNMP v3. SNMPv3 supports the highest level SNMP security.
SNMP ro user: Set a community string to authorize read-only access.
SNMP ro password: Set a password to authorize read-only access.
SNMP rw user: Set a community string to authorize read/write access.
SNMP rw password: Set a password to authorize read/write access.
SNMP Trap
Events such as cold start, interface up & down, and association & disassociation will report to an assigned server.