User Manual

Enable Ping Watchdog: Control will enable Ping Watchdog Tool.
IP Address To Ping: Specify an IP address of the target host which will be monitored by Ping
Watchdog Tool.
Ping Interval: Specify time interval (in seconds) between the ICMP “echo requests” are sent by
the Ping Watchdog Tool. Default is 300 seconds.
Startup Delay: Specify initial time delay (in seconds) until first ICMP “echo requests” are sent
by the Ping Watchdog Tool. The value of Startup Delay should be at least 60
seconds as the network interface and wireless connection initialization takes
considerable amount of time if the device is rebooted. Default is 300 seconds.
Failure Count To Reboot: Specify the number of ICMP “echo response” replies. If the specified number of
ICMP “echo response” packets is not received continuously, the Ping Watchdog
Tool will reboot the device.
4-6-5 Auto Reboot
The device can be set to auto reboot in a daily, weekly, or monthly setting.
4-7 Time Server Setup
System time can be configured via this page, and manual setting or via a NTP server is supported. Please go to
System, Time Server