User Manual

Secondary: The IP address of the secondary DNS server
4-3-4 Static Lease IP List
This function allows you to assign a static IP address to a specific computer forever, so you don’t have to set the
IP address for a computer, and still enjoy the benefit of using DHCP server. (This feature is only available in
Router AP, ClientBridge + Repeater AP and CPE + Repeater AP Modes)
Comment: You can enter a comment, for reference to the IP address you assigned. Ie “work
computer, Living Room, etc.
IP Address: Input the IP address you want to assign to this computer or network device
Mac Address: Input the MAC address of the computer or network device (total 12 characters, with
character from 0 to 9, and from a to f, like ‘001122aabbcc’) Click “Add” to add the IP list
to the table below.
4-3-5 802.1d Spinning Tree
The spanning tree network protocol provides a loop free topology for a bridged LAN between LAN interface and 8
WDS interfaces from wds0 to wds7. The Spanning Tree Protocol, which is also referred to as STP, is defined in the
IEEE Standard 802.1d. (This feature is only available in AP Mode, WDS Mode and ClientBridge + Repeater AP
Mode, CPE + Repeater AP Mode)
4-4 VLAN Setup
The VLAN setup is used to configure VLANs. Click under System, LAN Setup. (This feature is only available in Router
AP, AP and WDS Modes)