User Manual

DHCP: Check Enable button to activate this function or Disable to deactivate this service.
Start IP / End IP: Specify the range of IP addresses to be used by the DHCP server when assigning IP
address to clients. The default range IP address is 192.168.2.10 to 192.168.2.70, the
netmask is 255.255.255.0
DNS1 IP: Enter IP address of the first DNS server; this field is required.
DNS2 IP: Enter IP address of the second DNS server; this is optional.
WINS IP: Enter IP address of the Windows Internet Name Service (WINS) server; this is optional.
Domain: Enter the domain name for this network.
Lease Time: The IP addresses given out by the DHCP server will only be valid for the duration
specified by the lease time. Increasing the time ensure client operation without
interruptions, but could introduce potential conflicts. Lowering the lease time will avoid
potential address conflicts, but might cause more interruptions to the client while it will
acquire new IP addresses from the DHCP server. Default is 86400 seconds
4-3-3 DNS
Check “No default DNS server” (default) or “Specify a DNS server IP” to setup a system DNS. (This feature is only
available in AP Mode, WDS Mode and ClientBridge + Repeater AP Mode)
Primary: The IP Address of the Primary DNS server