User Manual

3-5-5-2 WEP - Wired Equivalent Privacy (Open/Shared)
When you select this mode, the wireless access point you are connecting to is using WEP encryption. If you are
unsure what kind of security the remote network is using, please contact the site administrator since this is unique
to that network.
WEP Auth Method: Open system - there is no authentication to access AP or wireless NIC
Shared - only those with the same key with the AP can connect to it.
Key Index: You can set up to four sets of WEP key, and you can decide which key is being used by
default here. If you don’t know which one you should use, select ‘Key 1’.
WEP Key 1-4: You can chose either HEX or ASCII for your WEP key value, for 64bit encryption strength
can use 10 digits for HEX (0~9, a~f and A-F) or 5 digits for ASCII (0~9, a~z and A~Z), for
128bit encryption strength can use 26 digits for HEX (0~9, a~f and A-F) or 13 digits for
ASCII (0~9, a~z and A~Z), for 152bit encryption strength can use 32 digits for HEX (0~9,
a~f and A-F) or 16 digits for ASCII (0~9, a~z and A~Z)
3-5-5-3 Wi-Fi Protected Access (WPA-PSK or WPA2-PSK):
When you select this mode, the wireless access point you are connecting to is using WPA encryption. If you are
unsure what kind of security the remote network is using, please contact the site administrator since this is unique
to that network.