User Manual

3-4-6 Repeater AP Setup
This allows you to create a repeater AP and set SSID to your wireless network. Enable this if you want the device
to act as a wireless repeater. If your choose disable, the device will be configured ONLY as a client bridge. If you
click enable, you can set the settings for the repeater.
Repeater AP: Enable if you wish to use the repeater function, disable if you wish to use the device
ONLY in client-bridge mode.
Repeater ESSID: Extended Service Set ID. When users are browsing for available wireless networks, this
is the SSID that will appear in the list.
3-4-7 Repeater Wireless Security
This page allows you to set up wireless security to prevent any unauthorized access to your wireless network.
Next to security type, choose your type of security (Hawking recommends WPA-2PSK)