User Manual

Now, open your browser and go to 192.168.2.254. It should take you back into the settings page. Go to system
and select “Setup Wizard”. Click “Next”
3-4-1 LAN setup
You can change the default IP of the device here if required. By default, the IP is 192.168.2.254
3-4-2 DNS
Choose your DNS type. By default, it will be received automatically but if you have a preferred DNS or you have to
specify one, please choose “specify” and enter in your values.
3-4-3 DHCP Server
In router mode, by default, IP addresses will be assigned to any LAN/WLAN clients that are connected to the
device. You can disable this feature. By default, DHCP is enabled and the IP range is 192.168.2.10 – 192.168.2.70.
If you want to use this device as a simple client bridge and/or a standard wireless repeater, you should disable this
service.