User Manual

Now, open your browser and go to 192.168.2.254. It should take you back into the settings page. Go to system
and select “Setup Wizard”. Click “Next”
3-3-1 LAN Setup
You can change the default IP of the device here if required. By default, the IP is 192.168.2.254. Note: The IP
address of each remote WDS peer must be unique.
3-3-2 DNS
Choose your DNS type. By default, it will be received automatically but if you have a preferred DNS or you have to
specify one, please choose “specify” and enter in your values.
3-3-3 Wireless Setup
This page is used to define the parameters for the wireless LAN clients. These settings should match the remote
WDS peer devices