Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
31323334353637383940
3-3 WDS Mode Setup
When WDS mode is chosen, the system can be configured in WDS Mode. In this mode, WDS (Wireless Distribution
Service, creates a wireless backbone link between multiple access points that are part of the same wireless
network. This allows a wireless network to be expanded using multiple access points without the need for a wired
backbone to link them. We can only guarantee WDS will only work with the HPOW5 and the HPOW10D devices.
Do not use other devices to set up a WDS network. This section provides a detailed explanation for users on how
to configure this mode.
Log into the settings page, go to system and select “Operating Mode”
Choose WDS Mode and click save & reboot. The device will now reboot.