User Manual

Band: Please select the wireless band you wish to use. By selecting different band setting, you’ll
be able to allow or deny the wireless client of a certain band.
If you select 802.11b only wireless clients using the wireless band you select 802.11b will
be able to connect to this access point. (Maximum transfer rate 11Mbps)
If you select 802.11b/g, then only wireless clients using 802.11b and 802.11g band will
be able to connect to this access point. (Maximum transfer rate 11Mbps for 802.11b
clients, and maximum 54Mbps for 802.11g clients)
If you want to allow 802.11b, 802.11g, and 802.11n clients to connect to this access
point, select 802.11b/g/n (Maximum transfer rate 11Mbps for 802.11b clients,
maximum 54Mbps for 802.11g clients, and maximum 300Mbps for 802.11n clients)
(Default).
If you select 802.11n, the only wireless clients using 802.11n band will be able to connect
to this access point. (Maximum 300Mbps for 802.11n clients)
Country: This device only supports United States WiFi channels.
Channel: Please select a channel from the dropdown list of ‘Channel Number’, You can choose any
channel number you want to use, and almost all wireless clients can locate the channel
you’re using automatically without any problem. However, it’s still useful to remember
the channel number you use, as some wireless clients support manual channel number
selecting, and this would help in certain scenarios when there are radio communication
conflicts
By default, it is on AUTO but if you have a specific channel you wish to use, you can
select it here.
Tx Power: You can adjust the output power of the access point to get the appropriate coverage for
your wireless network. Specify power levels between level 1 and level 9. Level 9 is the
maximum setting.