Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
31323334353637383940
3-2 AP Mode Setup
When AP mode is chosen, the system can be configured as a standard wireless access point. In this mode, the
device can be used as an Access Point for wireless client connection. All Ethernet ports wand wireless interfaces
are bridged together. This section provides a detailed explanation for users on how to configure AP mode.
Log into the settings page, go to system and select “Operating Mode”
Choose AP Mode and click save & reboot. The device will now reboot.
Now, open your browser and go to 192.168.2.254. It should take you back into the settings page. Go to system
and select “Setup Wizard”. Click “Next”