Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
21222324252627282930
Chapter III: Setup Wizard
This section will outline how to access the setup wizard for each of the modes in the HPOW5/HPOW10D
3-1 Router AP Setup
When Router AP mode is chosen, the system can be configured as a Wireless Router. In this mode, the device is
supposed to be connected to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN/WLAN port
share the same IP to ISP through the WAN port. The connection type can be setup in WAN page by using static IP,
Dynamic IP, PPPoE or PPTP client. This section provides a detailed explanation for users on how to configure
Router AP mode.
Log into the settings page, go to system and select “Operating Mode”