User Manual

2-3-2 Windows 7/8 IP address setup
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel. Click
View Network Status and Tasks, then click Change Adapter Settings. Right-click Local Area Network, then select
‘Properties’. Local Area Connection Properties window will appear, select ‘Internet Protocol Version 4 (TCP / IPv4),
and then click ‘Properties’
2. Select ‘Use the following IP address’, then input the following settings in respective field:
IP address: 192.168.2.20
Subnet Mask: 255.255.255.0
click ‘OK’ when finish.