Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
11121314151617181920
When Router AP mode is chosen, the system can be configured as a Wireless Router. In this mode, the device is
supposed to be connected to internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN/WLAN port
share the same IP to ISP through the WAN port. The connection type can be setup in WAN page by using static IP,
Dynamic IP, PPPoE or PPTP client. Go to section 3-1
When AP mode is chosen, the system can be configured as a standard wireless access point. In this mode, the
device can be used as an Access Point for wireless client connection. All Ethernet ports wand wireless interfaces
are bridged together. Go to section 3-2