Manualshelf

User Manual

ManualsBrandsHawking Technology ManualsComputers & AccessoriesHigh Power Outdoor Wi-Fi 2 x 5dBi Omni-Directional Multifunction Access Point, Bridge, Repeater, Router with PoE Included
11121314151617181920
Chapter II: System and Network Setup
2-1 Build Network Connection
Please follow the following instructions to build the network connection between your new HPOW5/HPOW10D
access point and your computers and other network devices:
1. Remove cover from device. Press the center tab (you may need a flathead screwdriver) and the cover should
be able to be removed with a small amount of force.
2. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the PoE
injector. Connect a Ethernet cable from the “P + Data Out” port on the PoE injector into the
HPOW5/HPOW10D LAN1(POE) Port.
3. Connect your HPOW5/HPOW10D from the “10/100 Data in” on the PoE injector to your computer/network.