Manualshelf

Owners manual

ManualsBrandsHawking Technology ManualsComputers & LaptopsHawking IEEE 802.11ac 1.71 Gbit/s Wireless Access Point - 5 GHz, 2.40 GHz - 6 x External Antenna(s) - 1 x Network (RJ-45) - Pole
11121314151617181920
8
Chapter 2 - Quick Setup
Your access point can be up and running in just a few minutes. This quick installation guide will help to set
up your access point and configure its basic settings. Please follow the instructions in the chapters below:
2-1. Initial Setup
1. Connect the access point to a PoE Switch or PoE Injector via Ethernet cable which can supply power
and data out.
2. Please wait a moment for the access point to start up. The access point is ready when the LED is green.
3. Set your computer’s IP address to 192.168.1.x where x is a number in the range 1 – 100. If you are
unsure how to do this, please refer to the Chapter 5-1.
Please ensure there are no other active network connections on your computer
(disconnect Wi-Fi connections and Ethernet cables).
4. Enter the access point’s default IP address 192.168.1.230 into the URL bar of a web browser.