CS152F 2-Port KVM Switch
FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
The complete CS152F package consists of: ♦ One 2-Port CS152F KVM Switch ♦ Two Premium Quality KVM Cables ♦ One User’s Manual Check to make sure that the unit was not damaged during shipping. If you encounter a problem, contact your dealer. Please read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the CS152F unit, and/or any of the devices connected to it. Copyright 2003 Hawking Technologies, Inc.
Overview…………………………………………………………………………………..3 Features……………………………………………………………………………………4 Hardware Requirements …………………………………………………………………..5 Console………………………………………………………………………………….5 PC……………………………………………………………………………………….5 Cables…………………………………………………………………………………...5 Introduction………………………………………………………………………………..6 Front View……………………………………………………………………………...6 Side View…………………………………………………………………………….6-7 Console View…………………………………………………………………………...
The CS152F 2-Port KVM Switch is a control unit that allows access to multiple computers from a single console (keyboard, monitor and mouse). Before the development of the CS152F, the only way to control multiple computer configurations from a single console was through a complex and costly network system. Now, with the CS152F, you can easily access multiple computers in a cost effective manner. The CS152F unit can control up to 2 PCs, all from a single console.
♦ Control Up to 2 PCs From a Single Console ♦ No Software Required - PC Selection via “Select” button on the Switch, HotKey combinations ♦ Quick View Scan Feature for Monitoring Selected PCs ♦ PS/2 and Serial Mouse Emulation Provided For System Bootup ♦ Console's PS/2 Mouse Controls All Connected PCs ♦ PS/2 Compatible Mouse Support - Microsoft Intellimouse Pro, Logitech FirstMouse, FirstMouse+, Support* ♦ SVGA, VGA and Multisync Monitor Support ♦ Superior Video Quality; 1920 x 1440 ♦ LED Display For Easy St
Console ♦ A VGA, SVGA, or Multisync monitor with the highest resolution that you will be using on any PC in the installation ♦ A PS/2 Style Mouse ♦ A PS/2 Style Keyboard PC The following equipment must be installed on each PC that is to be connected to the system: ♦ A VGA, SVGA or Multisync card. ♦ Either a 6-pin mini-DIN (PS/2 style), or DB-9 (standard serial) mouse port.
FRONT VIEW: 1. Port LEDs: Pressing the “Select” button switches access back and forth between the PCs. The selected LED lights indicate which port is the active one. 2. Sounds: The switch will beep when switching ports.
SWITCH SIDE VIEW Mouse Keyboard Video VIDEO CONSOLE Console Video (To monitor) CONSOLE – MOUSE / KEYBOARD / POWER Console Keyboard Console Mouse DC 9V 500mA Max (not necessary) -7-
Before you begin, please make sure that all of the devices that you are going to connect to have power turned off. Installation To set up your CS152F, please follow the steps below: 1. Plug the cables from your keyboard, mouse and monitor into the Console Ports. 2. Use the supplied connector cable sets (as described in the Hardware Requirements section) to connect the monitor, keyboard and mouse ports of the PCs to the CS152F 2-port KVM Switch. 3. The CS152F does not require external power.
Port Selection Controlling all the PCs connected to your CS152F from a single console couldn’t be easier. You can access any PC on the chain using two methods: Manual or HotKey. ! Manual Simply press the “Select” button located on top of the CS152F to switch back and forth between computers. The selected LED lights indicate the port that is currently in use.
Auto Scan Mode The CS152F Auto Scan feature automatically switches between the two PCs at regular 4 second intervals so that you can monitor their activity without having to take the trouble of switching yourself. To invoke the Auto Scan Mode, key in the following HotKey combination: [Scroll Lock] + [Scroll Lock] + [S] Reminder: Press and release the [Scroll Lock] key twice within 2 seconds. Once scanning begins, it continues until you press any other key to exit Auto Scan Mode.
Activity Meaning Off Port is not selected On (Steady) Port is connected to an active PC Flashing (On and Off equal) Port is connected to an active PC and is being accessed in Auto Scan mode. Troubleshooting Note: If you are experiencing difficulties, first make sure that there are no problems with the cables, and that they are all properly connected. Symptom Erratic Behavior Possible Cause Unit not receiving enough power under self-powered operation.
Mouse in unsupported mode Video Problems Resolution and/or Bandwidth set too high Poor cable quality The CS152F supports most mice with PS/2, including Microsoft Intellimouse, Logitech Net Mouse, etc. If the problem persists, change the mouse and/or mouse driver. Try a regular mouse with a generic mouse driver (like the ones that come with the operating system). Select a lower resolution and/or bandwidth We strongly recommend that you use the premium KVM cables included with your CS152F.
Specifications Function Computer Connections Specifications 2 Port Selection Push Button, Hot Keys LEDs 2-Port Status Connectors Keyboard 1 x 6-pin mini-DIN female (PS/2 style) – Console 2 x 6-pin mini-DIN female (PS/2 style) – PC Ports 1 x 6-pin mini-DIN female (PS/2 style) - Console Mouse 2 x 6-pin mini-DIN female (PS/2 style) – PC Ports 1 x HDB – 15-pin HDB Type Female – Console Video 2 x HDB – 15-pin HDB Type Female - PC Ports VGA Max Resolution Up to 1920 x 1440 Auto Scan Interval Operating System
