User's Manual IEEE 802.11b Mini Wireless USB Adapter H-WU300

3.4 Basic Setting for Infrastructure Mode

To connect with an Access Point, please follow the process below:

1. Select the “Setting” tab

2. Select “Infrastructure” for Network Type

3. Select or enter the correct SSID

4. Press the “Apply” button.

 SSID is the group name that will be shared by every member of

your wireless network .You will only be able to connect with an

Access Point (AP), which has the same SSID. Note that the SSID

will be case sensitivity.



Channel is not active in Infrastructure Mode.

 Profiles allows you to save five sets of default settings. After

entering the values of the settings (SSID, Network Type, Channel

etc.), set a name in the Profiles field. Click “Apply” button.