FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.
Index TABLE OF CONTENTS Introduction ……………………………….………………………………………...…… 3 Safety Instructions ………………………………………………………………....……. 3 Features ……………………………………….………………………………………….. 3 System Requirements ………………………….………………………………………… 3 Package Contents ……..………………………..………………………………………… 3 Hardware Installation ………..………………..…………………………………………. 4 Software Installation ……………………………..……………………………………….
Introduction The Hawking H-UC232S USB Serial Converter operates as a bridge between the USB and standard RS232 Serial port. The cable can easily be connected to a PC or USB Hub. Moreover, this product can connect RS-232 devices or any serial devices with DB 9P connectors, including PDA, scanner, printer and modem. Features Compliant with USB specification Revision 1.
Hardware Installation Software Installation Windows XP 1.
2. Select “Search removable media (floppy, CD-ROM…), and click “Next” 3. Click “Continue Anyway” 4. The Windows driver file searches for the device. Press “OK.
5. Click “Browse” and select “CD-ROM drive” as your target drives and click ”OK.” 6. Windows has finished installing the software; click “Finish” to complete installing driver.
6. In “System Properties,” “Device Manager,” “Prolific USB-to Serial Converter Port (COM3)” will appear. NOTE: The Serial Converter doesn’t support interrupt transfer mode devices: EX: KEYBOARD, MOUSE , JOYSTICK ETC. CALL HID DEVICE Windows 98SE 1. Windows will search for a new device, then press ”Next”.
2. Select “Search for the best driver for your device [Recommended],” and press ”Next”. 3.
4. The Windows driver file will search for the device. Press “Next”. 5. Windows has finished installing the software; click “Finish” to complete installing driver.
6. In “System Properties,” the Device Manager will display “USB to Serial Port (COM3)” and “Prolific USB-to Serial Comm Port.” Once this is displayed, installation is complete. Windows 2000 Click “Next” to start the installation.
Select “Search for the best driver for your device” and click “Next.” Select “CD-ROM drives” and click “Next” to continue. Click “Next” to install the driver for the device.
Click “Finish” to complete the installation. The statement “USB-to-Serial Port (COM3)” should appear in your “Device Manager.
Windows ME Select “Automatic search for a better driver” and click “Next”. Click “Finish” to complete installation.
These statements: “USB to Serial Port (COM3)” and “Prolific USB-to Serial Bridge” should appear in your “Device Manager.” NOTE: The USB Serial Converter cannot support interrupt transfer mode devices, such as, keyboards, mice, joysticks, etc. Disclaimer Information in this document is subject to change without notice.
