User Manual

Model No: HWRG1

NTP server

You may choose to select NTP server from the pull-down menu or enter

an IP address of a specific server.

Save

After completing the settings on this page, click Save to save the

settings.

Reset

Click Reset to restore to default values.

Refresh

Click to refresh the current time.

Upgrade Firmware

Browse Click the Browse button, find and open the firmware file (the

browser will display to correct file path).

Start Upgrade Click the Start Upgrade button to perform

Reset

Click Reset to restore to default values.

Navigation & Data Input

• Use the menu bar on the left of the screen, and the "Back" button on your Browser, for

navigation.

• Changing to another screen without clicking "Save" does NOT save any changes you may

have made. You must "Save" before changing screens or your data will be ignored.