User's Manual

26
3.6 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the latest
wireless network technology which makes
wireless network setup very simple. If you
have a WPS-enabled wireless access point,
and you want to establish a secure
connection to it, you don‟t have to configure
the wireless access point and setup data
encryption by yourself. All you have to do is to
go to the WPS setup page of this wireless
card, click the WPS button, and then press a
WPS button or enter a set of 8-digit code on
the wireless access point you wish to
establish a secure connection.
3.6.1 Pin Input Config (PIN)
1. The PIN code of your wireless network card is an eight-digit number located at the upper-
right position of configuration utility. Remember it, and input the number to your wireless
access point as the WPS PIN code (Please refer to the user manual of your wireless
access point for instructions about how to do this)
2. Click „Pin Input Config (PIN)‟ button now, and
the following message will appear on your
computer, click „Yes‟ to select a specific
wireless access point or click „No‟ to start PIN
method of WPS .
3. If you click „Yes‟, and the following
message will appear on your computer,
please select the SSID of wireless
access point that you wish to connect
and click „Select‟.